The Zigbee modlet LED

No Lights: When the modlet is configured and commissioned to the gateway there will be no lights.

Fast Spin: If the modlet light is spinning fast, once per second, the modlet is ready to join a network.

Slow Spin: If the modlet light is spinning slow, once every 2 seconds, the modlet failed to join a network. Hold the modlet down for 7 seconds to factor reset the modlet to get it back into a fast spin.

Blinking Red Ring: The modlet has been overridden. Tap the modlet button once to exit override mode.

Solid Red Ring: The circuit is overloaded. Tap the modlet button to reset the circuit.

Related Content
Set up a Zigbee smartAC kit

Did you find this article helpful?