Join a thermostat remote to a Zigbee modlet

If you have a ZigBee smartAC kit and your thermostat remote is either disconnected or offline, follow these steps to join your thermostat remote:

  1. Log into your account at

  2. Click on the "Modlet Network" tab.

  3. Find the modlet you would like to join your thermostat to and click the "Add Thermostat" icon in the Action column. You may need to detach the remote before you can join it again.

  4. Click the "Search" button. Insert the batteries and press any button on the remote to make sure the X in the lower corner is blinking.

  5. If the X is solid and not blinking, reset the thermostat remote by holding the power button until you see it start to blink, around 15 seconds.

  6. Make sure the thermostat remote is within 30 feet of the modlet with which you want to pair it.

  7. Once the thermostat connects, the X will disappear and your set temperature and room temperature will appear. Click "Finish" to return to your account.

Related Content
Join a thermostat remote to a WiFi modlet

Did you find this article helpful?